Greenhouse Designer Open the designerDesign

← All posts

Stone walls, brick, gravel floors and block benches

Build your greenhouse on a knee wall of field stone, river cobbles or brick, choose what goes underfoot, and put in benches of lumber or dry-stacked blocks.

Inside a greenhouse, looking down the aisle between benches of potted seedlings

What a greenhouse stands on matters as much as what it's covered with. This update is all about the bottom half.

Bases

As well as a 4x4 treated timber frame or a concrete block course, a greenhouse can now sit on a knee wall of squared field stone, round river cobbles or red brick. Set the wall's height and the frame starts on top of it. The stone walls are priced with a rubble trench, the brick with a concrete strip footing, and the door gets its gap.

Floors

Choose bare soil, gravel, pavers or a concrete slab, with or without landscape fabric under it. An apron can carry the same floor on outside the walls, so you have a path all round and less mowing against the glass. The floor is drawn on the plan and counted on the shopping list.

Benches

Benches run along one side or both, at the height and depth you pick. Build them from lumber, or from dry-stacked concrete blocks with 2x4 or 2x6 boards laid across them: cheap, rot-proof, and the blocks hold a little of the day's warmth into the night.

Try it on your own greenhouse

Everything here is in the designer now. It's free, and it runs in your browser.

Open the designer →