Greenhouse Designer Open the designerDesign

← All posts

Blueprints you can take to the lumber yard

The designer now draws a full set of construction drawings for your greenhouse: plans, elevations, a section, the roof framing and the materials, ready to print or save as a PDF.

A blueprint sheet showing the end and side elevations of a greenhouse, with dimensions and a title block

A 3D model is lovely to look at, but you can't hold it up against a stud wall. So the designer now draws your greenhouse as a set of construction drawings.

Open File → Blueprints and a new tab opens with the whole set, each sheet with a title block:

  • a cover with a picture of your design and an index of the sheets
  • the floor plan, with the door swing, the benches and every dimension you'll need to lay it out
  • front, back and side elevations
  • a section through the middle, showing the wall and roof framing
  • the roof plan and, on a truss roof, the truss drawings with their cuts
  • the materials list and the cut list

The drawings are projected straight from the same model you see in 3D, so they always match it. Change the pitch and the elevations change; add a vent and it's on the roof plan.

Print them on letter, tabloid, A4 or A3 sheets, or save them as a PDF from your browser's print dialog. If you build greenhouses for clients, you can add your company logo to every title block.

Try it on your own greenhouse

Everything here is in the designer now. It's free, and it runs in your browser.

Open the designer →